The Mishimoto Mustang EcoBoost Baffled Oil Catch Can is designed and engineered to reduce carbon buildup, a common issue with direct fuel injection engines. Thousands of test miles were logged on our Mustang EcoBoost to determine what can setup would work the best. Mishimoto engineers found that most vehicles, placing the catch can in the vacuum assisted PCV system of the vehicle will yield the most amount of oil accumulation during normal and aggressive driving. Where a catch can placed on the crankcase vent system on the left side of the engine will yield nearly no accumulation on stock or lightly modified vehicles. Having only one catch can, tied into the PCV system will, by far, work the best for the vast majority of Mustang EcoBoost’s on the road.
The Mishimoto Mustang EcoBoost catch can kit uses the Mishimoto 2-Port Compact Baffled Oil Catch Can with a bronze filter, and internal baffled to better separate the oil from the PCV vapors. The kit comes with two direct-fit silicone hoses with preassembled quick-disconnect fittings available in either black, blue, or red to suit your taste. It also includes one direct fit mounting bracket that not only is extremely easy to install but also mounts the can in a serviceable location! Two plastic, ½” barb fittings connect the hoses to the can. Like all of our products, this baffled catch can kit comes with the Mishimoto Lifetime Warranty!
15+ Ford Mustang EcoBoost
(1) Application-Specific Mounting Bracket
(1) Black, Anodized 6061 Aluminum Catch Can
(2) Direct-Fit Silicone Hoses with Quick-Disconnect Fittings
(2) Plastic Barbed Fittings
(2) Worm-Gear Clamps
(1) Air Diverter
(1) Internal Baffle & Rod
(1) 3/8” NPT Plug
(1) Large O-Ring
Mishimoto Lifetime Warranty
After installation, Mishimoto recommends checking the contents of the baffled catch cans every 1,000 miles until a baseline is established. Oil blow-by accumulation will vary with ambient temperatures and driving conditions. It is important that the contents of the can do not rise above the internal baffle.
INSTALLATION TORQUE SPECS
22 in-lbs (2.5N*M) recommended for all worm-gear clamps. These clamps have an operating range of 18-27 in-lbs 2-3N*M. Do not exceed the maximum torque rating of 27 in-lbs (3N*M).
Mishimoto Performance (MP), warrants all of its products under its 'no questions asked' limited lifetime warranty policy. Regardless of the defect in product, Mishimoto will replace the original product. Warranty claims must be accompanied by the original sales receipt from an authorized dealer.
A trained professional should install all MP products. Any issues with compatibility or installation should be addressed before attempting to install the product.
The purchaser's remedy for breach of this limited warranty, exclusive of all other remedies provided by law, is expressly limited to repair or replacement of any part or parts. All products returned for warranty consideration must be returned to MP with all transportation expenses prepaid.
MP shall not be responsible for damages to its products or injury to persons using the products in any manner that would constitute improper operation, including but not limited to: incorrect opening of radiator pressure caps, burst hoses, unintended application or usage not intended by MP, negligence, improper installation, or any other use that may cause damages or injury. MP shall not be responsible for injury or harm to persons or property when caused by persons or vehicles using its products.
Mishimoto, under its no questions asked warranty policy, will provide a warranty for all claims including vehicles involved in accidents. Warranty claims must include pictures of the accident and an official police report, and must be within three months of the accident.
All Mishimoto products are engineered to fit with OEM applications, as well as other Mishimoto products.
Mishimoto will not be held responsible for fitment issues caused by attempted installation of additional aftermarket parts. This includes, but is not limited to, performance parts and any other non-OEM replacement parts. Fitment with different brands cannot be guaranteed.
Furthermore, Mishimoto will not be held responsible for fitment issues caused by an accident. Many times, clearances needed for installation are very strict. If a vehicle has been involved in a front-end accident, available space for a product such as a thicker aluminum radiator may be compromised.
For all warranty claims, please contact us.
This product hasn't received any reviews yet. Be the first to review this product!
All prices are in USD.